REQUEST FOR PROPOSAL (RFP)
RFP N° 2025568
| Description: | Supply, Installation and Commissioning of a Biometric Access Control System, New Fish Market Office – Monrovia, Liberia |
| Issuing Organization: | Catholic Relief Services (CRS) Liberia |
| Donor / Funding Source: | Catholic Relief Services |
| Project / Grant: | Discretionary Fund |
| POET Code: | Project Number-Task |
| Issue Date: | November 18, 2026 |
| Pre-Bid Meeting: | N/A |
| Site Visit Date: | November 25, 2026 at 10:00 AM GMT |
| Submission Deadline: | December 9, 2026 at 3 PM GMT |
| Submission Method | Email – two separate emails required (see section II.8) |
| Submission Email | liberiaprocurement@crs.org |
| Bid Opening: | N/A |
| Clarifications: | liberiarfq@crs.org |
| Clarification Deadline: | November 28, 2026 at 3 PM GMT |
| THIS RFP REQUIRES TWO SEPARATE EMAILS. Email 1 = Administrative, Eligibility, MQR & Technical Proposal. Email 2 = Financial Proposal. Each email must have the EXACT subject line format specified in Section 4. |
| TABLE OF CONTENTS |
| Section 1: General Information Section 2: Instructions to Bidders (ITB) Section IIA: Financial Conditions of Contract Section 3: Eligibility & Minimum Qualification Requirements Section 4: Evaluation Criteria Section 5: Scope of Work Section 6: Post-Qualification Section 7: Bid Forms & Annexes
Annex 1: Bid Submission Form Annex 2: Declaration of Absence of Conflict of Interest Annex 3: Administrative & Eligibility & MQR Compliance Checklist Annex 4: Technical Evaluation Matrix Annex 5: Past Client Reference Information Form Annex 6: Key Personnel CVs Annex 7: Letter of Tender Annex 8: Financial Proposal / Bill of Quantities Annex 9: Subcontractor Disclosure Form Annex 10: Advance Payment Request Form Annex 11: Performance Bond Template Annex 13: Equipment Compliance Self-Declaration (NDAA Section 889)
|
To: Dear Prospective Bidder,
November 18, 2026
SUBJECT: Request for Proposal – Supply, Installation and Commissioning of a Biometric Access Control System, New Fish Market Office | RFP N° RFP_2025568
Dear Sir / Madam,
Catholic Relief Services (CRS) Liberia invites your organization to submit a proposal for Supply, Installation and Commissioning of a Biometric Access Control System, New Fish Market Office – Monrovia, Liberia. This procurement is conducted under the Quality and Cost Based Selection (QCBS) method with a 70/30 technical/financial split.
Please read this document in full before preparing your submission. Key points:
Clarification questions must be submitted in writing to liberiarfq@crs.org by November 28, 2026 at 3 PM GMT, with the subject: ‘CLARIFICATION – RFP N° RFP_2025568 – Company Name’. Clarification responses and any amendments will be published through the same channels used to advertise this RFP and will not be sent individually to bidders. Bidders are responsible for regularly monitoring those channels for updates throughout the solicitation period. By submitting a proposal, you acknowledge the CRS Code of Conduct for Suppliers & Services Providers included as Annex 12. The selected vendor will be required to sign the formal certification prior to contract issuance.
We look forward to receiving your proposal.
Sincerely,
CRS Liberia – Procurement Department
liberiarfq@crs.org
SECTION I: GENERAL INFORMATION
Catholic Relief Services (CRS) is the international humanitarian agency of the Catholic community in the United States. CRS has worked in Liberia since 1957 and established a permanent country program office in 1990. CRS remained in the country through the years of conflict, delivering humanitarian assistance, and responded to the 2014 Ebola outbreak before transitioning to long-term development programming by 2016. Assistance is provided based on need, regardless of creed, race, or nationality, in partnership with local, national, and international organizations, including government ministries and Catholic institutions.
CRS Liberia currently works in the following program areas:
Across these areas, CRS integrates peacebuilding, local leadership, safeguarding, social inclusion, and youth engagement.
CRS Liberia is relocating its main operational office to new premises at Fish Market, Monrovia. The organization requires a complete biometric access control system to secure five (5) designated entry points at the new premises. The system will manage access for approximately 80 staff members, with the capacity to accommodate additional users as the organization grows.
CRS Liberia does not have pre-defined technical specifications for this procurement. Bidders are expected to conduct a professional need and site assessment during the mandatory pre-bid inspection, propose a complete solution, and identify any door modification works required at each entry point. The evaluation will be based on the quality and fitness-for-purpose of the proposed solution.
The procurement covers the following:
The proposed system must be designed for scalability. CRS Liberia will enroll additional staff members after initial deployment. The enrollment station must support the configuration and issuance of additional cards without requiring replacement of door reader units. Bidders must address scalability explicitly in their technical proposals.
This procurement uses Quality and Cost Based Selection (QCBS) with a 70/30 Technical/Financial split. QCBS is used because CRS Liberia has not defined technical specifications; the quality and fitness-for-purpose of each bidder’s proposed solution is what is being evaluated.:
The contract is awarded to the bidder with the highest combined score, subject to a minimum technical score of 49 points (70% of 70).
SECTION II: INSTRUCTIONS TO BIDDERS (ITB)
| Stage | Title | Method | Threshold / Outcome |
| 1 | Administrative & Eligibility & MQR (Email 1) | Pass/Fail check of all mandatory administrative and eligibility documents | ALL criteria must PASS to proceed. Technical Proposal is open only for passing bidders. |
| 2 | Technical Evaluation (Email 1) | Graduated weighted scoring against published criteria | Minimum Technical Qualifying Score 49 pts to proceed. Email 2 opened only for bidders meeting this threshold. |
| 3 | Financial Evaluation (Email 2) | Arithmetic correction → ALO check → financial scoring formula | Lowest evaluated price = 30 pts. Combined score determines award. |
| Emails of eliminated bidders are unopened at each stage. No bidder will have access to another bidder’s proposal at any stage. | |||
Attendance at the pre-bid site inspection is mandatory. The site visit will be held at the new Fish Market premises (Close to Last Mile Heath Office; Prime Realty Compound, Fish Market, Tubman Boulevard, Montserrado County) on November 25, 2026 at 10:00 GMT. Proposals from firms that did not attend the mandatory site inspection will be disqualified. CRS Liberia will issue a Site Inspection Attendance Register; bidders must sign it on the day.
| IMPORTANT: ONLINE SUBMISSION ONLY |
| All proposals must be submitted by email only. CRS will not be responsible for proposals not received due to email delivery failure, spam filters, or incorrect subject lines. |
| EMAIL 1 – ELIGIBILITY & MQR SUBMISSION | EMAIL 2 – FINANCIAL PROPOSAL | |
| Send to: | liberiaprocurement@crs.org | liberiaprocurement@crs.org |
| Subject line format (MANDATORY) – COPY EXACTLY | RFP- 2025568- ELIGIBILITY & TECHNICAL PROPOSAL – Company Name | RFP- 2025568- FINANCIAL PROPOSAL – Company Name |
| Deadline: | December 9, 2026 at 3 PM GMT | December 9, 2026 at 3 PM GMT Price proposals received after the deadline will not be opened, regardless of whether Email 1 was received on time. |
| Contents | Annex 1 (Bid Submission Form) Annex 2 (COI Declaration) Annex 3 (MQR Compliance Checklist) Annex 4 Technical Proposal Annex 5 Past Client References Annex 6 (Key Personnel CVs) Annex 9 Subcontractor Disclosure, if applicable Annex 13 Self-Declaration | Annex 7 Letter of Tender Annex 8 (Financial Proposal / Budget) DO NOT include any cost information in Email 1 |
| File size limit: | Maximum 15 MB per email. Split attachments into multiple emails if needed – label clearly: ‘Email 1 of 2 – ELIGIBILITY’ etc. | Maximum 10 MB |
| Format: | PDF preferred. Scanned documents must be readable. Including page numbers in your proposal is recommended for clarity and easy reference. | Signed PDF and Excel. Do not send Word documents for the price schedule. |
| DO NOT INCLUDE: | Any pricing, unit rates, financial proposals, or cost information in this email. | Eligibility documents in this email. |
| 8.1 MANDATORY FORMAT REQUIREMENTS |
| All technical proposals must meet the following formatting requirements. Non-compliance may result in point deductions or disqualification at the administrative stage. |
| # | Requirement | Standard |
| 1 | File format | PDF only. One single PDF file for the entire technical proposal. Do not send separate PDFs per section. Section A: Site Assessment Summary: findings from the mandatory site inspection for each of the five entry points, including current door type, locking mechanism, and proposed modification works Section B: Proposed Access Control Solution: technology description, hardware specifications, card type and reader type, management software, and rationale for the proposed system Section C: Scalability Plan: how the system supports future card enrollment beyond the initial 80 staff without door unit replacement Section D: Implementation Work Plan: installation sequence, timeline, and disruption mitigation for each door Section E: Organizational Experience and Client References Section F: Warranty, Maintenance, and After-Sales Support Plan |
| 2 | File name | RFP_2025568_TECHNICAL_CompanyName.pdf Example: RFP-xxxxxxx_TECHNICAL_SierraTechLtd.pdf |
| 3 | Page numbering | Every page must be numbered. Format: ‘Page X of Y’. Pages without numbers will be treated as non-compliant. |
| 4 | Page size | A4 portrait. Landscape pages permitted only for tables and diagrams. |
| 5 | Minimum font size | 11 pt body text. 9 pt minimum for tables. Text smaller than 9 pt will not be evaluated – bidder’s risk. |
| 6 | Page limit | Maximum 20 pages excluding cover page, table of contents, and CVs. |
| 7 | Cover page | Required. Must show: RFP 2025568, Company Name, Contact Details, Date. Does not count toward page limit. |
| 8 | Table of contents | Required. Must reference the section structure in 9.2 below. Does not count toward page limit. |
| 9 | Language | English |
| 8.2 REQUIRED TECHNICAL PROPOSAL STRUCTURE | ||
| TEMPLATE INSTRUCTION: Bidders must follow this exact section structure. Evaluators will review proposals using this order – sections out of order will be harder to score. Adjust page limits per section to match the complexity of your scope. | ||
| Section | Title | Content Expected / Page Limit |
| Cover Page | Cover Page | RFP 2025568, Company Name, Contact, Date. Not counted in page limit. |
| TOC | Table of Contents | Must reference all sections by page number. Not counted in page limit. |
| TECH01 | Organizational Experience in Access Control and Electronic Security Systems (max 10 pages) | Provide evidence of relevant past audits, qualifications, and donor acceptance. Proposals must follow the exact order to facilitate evaluation, and any deviation may affect scoring. |
| TECH02 | Quality of Proposed Technical Solution (max 6 pages) | Check if the proposed team has the right qualifications and experience for drip irrigation projects. Evaluators look for relevant degrees, practical installation skills, and proven farmer training experience. CVs and certificates must show the team can deliver the work required. |
| TECH03 | Warranty, Maintenance, and Local Support Capacity (max 4 pages) | Describe your proposed approach and methodology. Explain why your approach is appropriate for this context and develop a diagram that shows the layout of the field showing the drip irrigation system, and water towers |
| IMPORTANT: All two emails must be received by December 9, 2026 at 3 PM GMT. Late submissions – defined as any email received after the deadline timestamp – will be rejected without review, regardless of circumstances. CRS server timestamps are the definitive record. Bidder’s email client timestamps are not accepted. Allow sufficient time for large files to upload and transmit. |
Stage 1 – Public Opening of Proposals: CRS will publicly open and record all proposals received by the submission deadline on 10 December 2026 at 10 AM GMT, at CRS office / VIRTUAL LINK: RFP xxxxxx – Bid Opening Stage 1 | Meeting-Join | Microsoft Teams
Bidders or their authorized representatives may attend. During the opening, CRS will announce the name of each bidder and confirm receipt of the required separate proposal emails. The Financial Proposal attachment will not be opened at this stage. No evaluation or determination of responsiveness will be made during the opening. The information announced will be documented in the official Bid Opening Record.
Evaluation between Stages: Following Stage 1, CRS will evaluate the administrative, eligibility, minimum qualification, and technical proposals in accordance with the criteria stated in this RFP. Only bidders who pass all mandatory requirements and achieve the minimum technical qualifying score will proceed to Stage 2.
Stage 2 – Public Opening of Financial Proposals: The Financial Proposals of bidders who pass all mandatory requirements and achieve the minimum technical qualifying score will be publicly opened on 17 December 2026 at 10 AM GMT, at CRS Office. The event link will be shared with bidders that pass stage 1.
CRS will communicate the confirmed opening details to bidders in advance. At the opening, CRS will read aloud and record the name of each qualifying bidder and its total financial offer as submitted. Financial offers will remain subject to arithmetic verification and financial evaluation in accordance with this RFP.
The Financial Proposals of bidders who do not qualify for Stage 2 will remain unopened. Attendance at either public opening is optional and will not affect a bidder’s eligibility or evaluation.
| Currency: | USD |
| Tax treatment: | Prices must state applicable taxes separately and comply with the Liberia Revenue Code, as amended, including Sections 1021 and 1022 on services tax. |
| Withholding Tax (National & International Bidder): | Applicable taxes will be withheld and remitted in accordance with the Liberia Revenue Code, as amended, and Liberia Revenue Authority requirements. |
| Validity period: | 90 calendar days from submission deadline |
| Language: | English. |
Financial proposals must be submitted in United States Dollars (USD). Prices must be all-inclusive of professional fees, field allowances, transport, training costs, materials, and all other costs, with applicable taxes stated separately. Tax treatment, withholding, remittance, and any exemption shall be applied in accordance with the Liberia Revenue Code, as amended, and Liberia Revenue Authority requirements. For services tax, bidders should refer to Sections 1021 and 1022 of the Liberia Revenue Code, which govern the imposition, applicable rates, and categories of taxable services. This requirement applies to both domestic and international bidders
Written questions must be submitted to liberiarfq@crs.org by November 28, 2026 at 3 PM GMT, with the subject line ‘CLARIFICATION – RFP N° 2025568 – Company Name’. Responses and any amendments will be published through the same channels used to advertise this RFP and will not be sent individually to bidders. Bidders are responsible for regularly monitoring those channels for updates throughout the solicitation period.
Bidders must declare in their technical proposal (Annex 9) whether they intend to subcontract any part of the works. Major subcontractors (those performing more than 15% of contract value) are subject to the same eligibility checks as the prime contractor. The prime contractor remains fully responsible for all subcontracted work. Subcontractors may not be substituted after award without prior written CRS approval.
Bidders represent and warrant that neither the bidder, its affiliates, subsidiaries, subcontractors, nor any of their key personnel are:
CRS will conduct Bridger screening on all bidders as part of the Eligibility check. Bidders found on any sanctions list will be immediately disqualified. CRS has zero tolerance for bribery and corruption.
A contract will be executed with the bidder whose proposal offers best Value for Money – responsive to this RFP, passing all eligibility and technical requirements, and achieving the highest combined Technical + Financial score. CRS reserves the right to request clarifications and conduct negotiations prior to award. CRS may make separate awards per component or make no award at all. This RFP does not oblige CRS to execute a contract or reimburse any bid preparation costs.
SECTION IIA: FINANCIAL CONDITIONS OF CONTRACT
| This section sets out the financial security conditions applicable to the contract resulting from this RFP. Bidders must read this section carefully. Conditions marked APPLICABLE are mandatory for this procurement. Conditions marked NOT APPLICABLE – omit do not apply. Procurement Lead must confirm which conditions apply before issuing the RFP and delete the inapplicable ones. |
| 18.1 ADVANCE PAYMENT CONDITIONS | |
| Status: | ☐ NOT APPLICABLE – skip this clause |
| Maximum advance percentage: | ___ % of the total contract value – not to exceed 30% without HoOps / CR approval |
| Trigger for advance payment: | Upon contract signature AND receipt of a valid Advance Payment Guarantee |
| Advance payment currency: | Same currency as the contract |
| Deduction schedule: | Advance recovered proportionally from each milestone payment. Full recovery before final payment is released. |
| Bidder to request in: | Annex 10 if applicable |
| 18.2 ADVANCE PAYMENT GUARANTEE (APG) – REQUIREMENTS |
| If an advance payment is approved, the vendor MUST provide an Advance Payment Guarantee before the advance is disbursed. The APG must meet ALL of the following requirements: |
Failure to provide a compliant APG will result in the advance request being declined. CRS may proceed to contract execution without the advance payment in such cases.
| 18.1 PERFORMANCE BOND CONDITIONS | |
| Status: | ☐ NOT APPLICABLE – skip this clause |
| Amount: | 5–10 % of total contract value ___% confirmed for this contract |
| Deadline for submission: | Within 14 calendar days of contract signature |
| Validity period: | From contract signature until 30 days after final acceptance of all deliverables |
| Form: | Bank guarantee (preferred) |
| Bidder to request in: | Annex 11 if applicable |
| 18.2 PERFORMANCE BOND – RELEASE CONDITIONS |
| The Performance Bond will be released upon ALL of the following: • All deliverables or scope of work accepted in writing by CRS. • All warranty obligations fulfilled or transferred to a warranty bond. • No outstanding claims, disputes, or unresolved quality issues. • Written release issued by the CRS Head of Operations. If the vendor fails to perform or is in material breach, CRS may call the bond without prior notice. |
| 19.1 RETENTION CONDITIONS | |
| Status: | ☐ APPLICABLE to this contract ☐ NOT APPLICABLE – skip this clause |
| Retention rate: | 10% confirmed for this contract – deducted from each milestone payment |
| Maximum retention cap: | 10% of total contract value – once reached, no further retention deducted |
| Retention held in: | CRS operating account – does not accrue interest for the vendor |
| Alternative to retention: | Vendor may substitute retention with a Retention Bond (same form as Performance Bond) requires CRS HoOps approval |
| 19.2 RETENTION RELEASE CONDITIONS |
| Retention is released in TWO tranches: |
First Tranche 50 % of total retention released when:
– All deliverables or works substantially completed and accepted in writing by CRS.
– Practical completion certificate issued by CRS or appointed supervisor.
– No material defects outstanding at completion.
Second Tranche – remaining 50% released when:
– Defects liability / warranty period has elapsed without outstanding defects.
– Any defects notified during the defects liability period have been rectified to CRS’s satisfaction.
– Written release issued by the CRS Head of Operations.
Defects Liability Period: 12 months from the date of practical completion, unless otherwise stated in the Scope of Work.
CRS reserves the right to use retained amounts to rectify defects not corrected by the vendor within 14 days of written notice.
SECTION III: ADMINISTRATIVE & ELIGIBILITY & MINIMUM QUALIFICATION REQUIREMENTS (MQR)
| All criteria are Pass/Fail. Failure to meet any mandatory criterion results in disqualification at Stage 1. Bidders must self-audit using Annex 3 before submission. |
| ADMINISTRATIVE & ELIGIBILITY & MQR CRITERIA | |||||
| No. | Subject | Minimum Requirement | Assessment Method | Document to Submit | Type |
| A1 | Bid Submission Form | Completed, stamped & signed | Review Annex 1 | Annex 1 | MUST |
| A2 | COI Declaration | Completed, stamped & signed | Review Annex 2 | Annex 2 | MUST |
| A3 | Completed Administrative compliance checklist signed | Annex 3 | |||
| A4 | Technical proposal meeting format requirement (section II.8) | Minimum 3 years in agriculture inputs/irrigation business OR agricultural extension services | Annex 4 | MUST | |
| A5 | Past Clients | Past Client References – minimum 3 completed (Annex 5) | Annex 5 | ||
| A6 | CVs for Lead Technician and key installation staff | Annex 6 | |||
| E1 | Proposal submitted by deadline | Submit proposal (all 2 emails) before December 9, 2026 at 3 PM GMT | CRS server timestamps verification | MUST | |
| E2 | Business Registration | Valid and current | Copy verified against expiry date | Valid copy | MUST |
| E3 | Tax Clearance (LRA) | Valid and Current – or proof of payment. | Verified through https://eservices.lra.gov.lr:8448/tccApp/#/home | Valid copy | MUST |
| E4 | Sanctions Check | Not on any applicable sanctions list | CRS Bridger check of bidders and stakeholders – internal | N/A | MUST |
| E5 | Site Visit | Attended mandatory pre-bid site inspection (signed Site Inspection Register) | |||
| E6 | Equipment Compliance (NDAA Section 889) | No prohibited manufacturers in the proposed solution | Factsheet or brochure confirming manufacturer name, model, and country of origin. Must not include Huawei, ZTE, Hytera, Hikvision, Dahua, or related entities. | Annex 13 Self-Declaration | |
SECTION IV: EVALUATION CRITERIA
| OVERALL SCORING SUMMARY | |
| Evaluation method: | QCBS – Quality and Cost Based Selection |
| Technical weight: | 70 points maximum |
| Financial weight: | 30 points maximum |
| Total: | 100 points – highest combined score wins |
| Minimum technical threshold: | 49 points out of 70. Bidders below this threshold are eliminated. Email 2 is not opened. |
Each criterion is scored using graduated bands (Excellent 100% / Good 75% / Fair 50% / Poor 0%). The evaluator must select the band that best matches the proposal and record the corresponding score. The band descriptions are the scoring standard – evaluators must not apply their own interpretation.
Evaluator Verification notes (shown in each criterion cell) specify exactly what to check and where to find it in the proposal. All scoring must be completed independently before any group discussion.
Assess the firm’s track record in supplying and installing electronic access control systems, biometric security systems, or related electronic security infrastructure. Focus on scale, complexity, and similarity to CRS Liberia’s scope (multi-door access control, card-based systems, institutional clients)
| Grade | Max Points | Requirements | Acceptable Evidence | Evaluator Verification |
| EXCELLENT | 25 pts | 5 or more completed access control or electronic security installations in the last 5 years, including at least 2 for INGOs, diplomatic missions, banks, or corporate clients in Liberia; at least 1 project involved a card-based or biometric system serving 50 or more users | Signed contracts AND completion certificates or client reference letters for each qualifying project; at least 3 reference letters from named clients confirming scope | Count only projects with two-document evidence. Verify client identity and confirm scope included electronic access control. Prioritize projects in Liberia with comparable user scale. |
| GOOD | 19 pts | 3-4 qualifying projects in the last 5 years, at least 1 for an INGO or institutional client in Liberia | Contracts + certificates/letters for 3-4 projects; at least 2 client reference letters | Verify 3-4 qualifying projects. Confirm scope is access control or electronic security, not generic electrical works. |
| FAIR | 12 pts | 1-2 qualifying projects in the last 5 years with full documentary evidence | At least 1 signed contract + 1 completion certificate or reference letter | At least 1 fully evidenced qualifying project. Confirm scope is electronic security or access control specifically. |
| POOR | 0 pts | Exactly 1 qualifying project with partial evidence only; or no experience in access control but experience in related electrical/IT installation | At least 1 contract or reference letter, but supporting documentation is thin or scope is adjacent rather than directly relevant | Award POOR if scope is marginal or evidence is incomplete. Firm may still proceed if total technical score reaches 49 points. |
Assess the fitness-for-purpose, completeness, and technical quality of the bidder’s proposed access control solution. This is the central criterion: because CRS Liberia has not prescribed specifications, the quality of what each bidder proposes based on their site assessment is the primary differentiator. Evaluate the technology proposed, the site assessment findings, door modification identification, scalability design, and implementation approach.
| Grade | Max Points | Requirements | Acceptable Evidence | Evaluator Verification |
| EXCELLENT | 25 pts | Proposal demonstrates: (1) a thorough site assessment report covering all 5 doors individually with current door type, existing hardware, and specific modification works required; (2) a clearly specified access control technology with named hardware, card type (RFID, smart card, or biometric), and management software; (3) explicit scalability design showing how additional staff are enrolled without replacing door units; (4) a credible installation work plan minimizing disruption to office operations | Technical Proposal Sections A, B, C, D; site assessment must name each door location and modification requirement specifically; scalability section must state maximum card capacity of proposed system | Confirm the site assessment covers all 5 entry points individually. Verify scalability claim against stated system capacity. Check that door modification works are specific, not generic. |
| GOOD | 19 pts | Site assessment covers all 5 doors but modification details are partly generic; solution is well-specified with named hardware; scalability addressed but with limited technical detail; implementation plan is credible | Technical Proposal Sections A, B, C, D present; most doors assessed individually; hardware model named; scalability mentioned with some specifics | Assess whether the proposed solution would realistically meet CRS Liberia’s requirements. Minor gaps in detail do not preclude GOOD if the solution is fundamentally sound. |
| FAIR | 12 pts | Site assessment is present but superficial; solution described in general terms without named hardware; scalability mentioned but not explained; implementation plan basic | Technical Proposal present with Sections A and B; site assessment references the visit but lacks door-specific detail; solution described at category level only | Award FAIR if the proposal is technically feasible but underspecified. The evaluator must be able to determine that the proposed approach would work in principle. |
| POOR | 0 pts | No site assessment included; or solution is a generic brochure with no adaptation to CRS Liberia’s premises; or no scalability consideration; or proposal is clearly copy-pasted from another bid | Technical Proposal is generic, absent key sections, or does not reference the Fish Market site at all | Award POOR if the proposal cannot demonstrate that the bidder conducted a genuine site assessment and tailored their solution accordingly. |
Assess the warranty period and terms on hardware and workmanship, the quality of the post-installation support and maintenance plan, and the bidder’s demonstrated capacity to provide on-site support in Monrovia. Local support availability is critical: a failed access control system locks staff out of the office. Response time and local presence are weighted heavily.
| Grade | Max Points | Requirements | Acceptable Evidence | Evaluator Verification |
| EXCELLENT | 20 pts | Minimum 24 months warranty on hardware and installation workmanship; named local support contact based in Monrovia; written commitment to respond to system failures within 4 hours; preventive maintenance visit included in contract; software updates included for warranty period | Warranty statement in Technical Proposal Section F stating months for both hardware and workmanship; named Monrovia-based contact with phone number; written SLA or maintenance schedule | Verify warranty period is stated in months. Confirm named support contact is physically based in Monrovia. Confirm 4-hour response commitment is explicit. |
| GOOD | 15 pts | 18 months warranty on hardware and workmanship; local support contact named; response within 8 hours committed; preventive maintenance included or offered at a named fee | Warranty statement with 18-month period; named contact; response time committed in writing | Verify 18-month warranty and named contact. Response time must be a commitment, not an aspiration. |
| FAIR | 8 pts | 12 months warranty (industry standard minimum); support available but response time not committed; no named Monrovia contact; no preventive maintenance plan | Warranty clause present; 12-month period confirmed; support described in general terms | Award FAIR for standard 12-month warranty with no enhanced support terms or local presence commitment. |
| POOR | 0 pts | Warranty less than 12 months; or no local support in Liberia; or warranty terms are conditional or vague; or no after-sales support plan provided | Warranty clause absent, below 12 months, or excludes common failure scenarios such as reader malfunction or door controller failure | Award POOR if the firm cannot demonstrate local support capacity or if warranty terms cannot be objectively verified. |
PROCESS NOTE: Each evaluator completes this table independently using the Individual Technical Scoring Sheet (Annex M). Scores are then transferred to the Score Consolidation Sheet (Annex N). Financial proposals are NOT open until all evaluators have completed this table and the minimum threshold result is confirmed.
| Step | Check | Rule |
| F1 | Arithmetic Correction | Unit rates govern over totals. Subtotals govern over Grand Total. Corrected totals are used for all subsequent evaluations. Vendors are notified of corrections. |
| F2 | Abnormally Low Offer Check | Any bid more than 15% below the average of all evaluated financial proposals is flagged as potentially abnormally low. The bidder is asked for written justification. If justification is not satisfactory, the bid may be rejected. |
| F3 | Financial Scoring Formula | PF = 30 × (C_lowest / C_bidder) Where: PF = financial score attributed | C_lowest = lowest evaluated price | C_bidder = this bidder’s evaluated price. The lowest-priced qualifying bidder always receives 30 points. |
| F4 | Combined Score | Combined Score = Technical Score + Financial Score (max 100 pts). Award to highest combined score, subject to price reasonableness and reference check. |
| Component | Calculation | Weight | Max Score |
| Technical Score | Sum of TECH 1 + TECH 2 + TECH 3 | 70% | 70 pts |
| Financial Score | (Lowest Proposal / This Proposal) × 30 | 30% | 30 pts |
| COMBINED SCORE | Technical Score + Financial Score | 100% | 100 pts |
The bidder with the highest combined score, subject to satisfactory post-qualification verification, will be recommended for contract award.
SECTION V: SCOPE OF WORK
The selected service provider shall supply, install, test, commission, and hand over a complete biometric card access control system at CRS Liberia’s new Fish Market Office, Monrovia. The scope is output-based: the contractor is responsible for proposing and delivering a fully functional, secure, and scalable system that meets the access control outcomes described in this RFP. The specific technology, hardware model, card type, and door modification works are for the contractor to determine through professional site assessment and propose in their Technical Proposal.
The delivered system must achieve the following outcomes:
| # | Deliverable | Acceptance Criteria | Payment Link |
| D1 | Site Assessment Report: door-by-door findings and modification works required | Approved by CRS Liberia within 2 days of delivery; covers all 5 doors individually | Pre-condition for M2 |
| D2 | Door modification works completed at all 5 entry points | CRS site walk confirms all modifications complete and structurally sound | M2 trigger |
| D3 | All 5 door reader units installed and operational | Each unit responds to card presentation; access denied to unenrolled cards | M2 trigger |
| D4 | 90 access cards delivered (80 staff + 10 spare) | Cards physically delivered and confirmed functional on installed readers | M2 trigger |
| D5 | Enrollment station delivered, installed, and operational | Administrator can successfully enroll a test card and configure access levels | M2 trigger |
| D6 | All 80 staff enrolled in the system | Each staff member’s card opens their designated door(s); CRS IT spot-checks 10 random staff | M3 trigger |
| D7 | System administrator training completed | Designated CRS administrator demonstrates: card issuance, card deactivation, access log export | M3 trigger |
| D8 | As-built documentation and handover package | Package includes: system architecture diagram, door-by-door installation record, admin user manual, warranty certificates, vendor support contact details | M3 trigger |
SECTION VI: POST-QUALIFICATION ACTIONS
CRS will verify the accuracy and authenticity of information submitted by the recommended bidder before contract execution. This includes reference checks (minimum 2), document authentication, site visits (if applicable), and financial capacity verification. If the recommended bidder fails post-qualification, CRS reserves the right to offer the contract to the next-ranked bidder subject to the same post-qualification process.
SECTION VII: BID FORMS & ANNEXES
ANNEX 1 – BID SUBMISSION FORM (Submit in Email 1)
| Date: | |
| RFP N°: | |
| Organization: |
We, the undersigned, declare that:
| Authorized Signature: | |
| Full Name: | |
| Title / Capacity: | |
| Company Name: | |
| Company Stamp: | |
| Date: |
ANNEX 2 – DECLARATION OF ABSENCE OF CONFLICT OF INTEREST (Submit in Email 1)
(Print on company letterhead)
Date: ____________________
To: Evaluation Committee
| I, Mr./Mrs.: | ____________________________ |
| Acting as: | ____________________________ |
| Company (Name & Address): | ____________________________ |
Declare that:
| Company Name: | ____________________ | Date: | ____________________ |
| Name of Signatory: | ____________________ | Position: | ____________________ |
| Signature: | ____________________ | Company Stamp: | ____________________ |
ANNEX 3 – ADMINISTRATIVE & ELIGIBILITY & MQR COMPLIANCE CHECKLIST (Bidder Self-Audit) (Submit in Email 1)
Complete and include as the first page of Email 1. Tick each item to confirm inclusion.
| # | Document | Source / Issuer | Included ☐ | |
| 1 | Bid Submission Form (Annex 1) completed, stamped & signed | Prescribed form | Email 1 | ☐ |
| 2 | COI Declaration (Annex 2) completed, stamped & signed | Prescribed form | Email 1 | ☐ |
| 3 | Business Registration Certificate (certified copy, not expired) | National Registration Authority | Email 1 | ☐ |
| 4 | Tax Clearance Certificate from NRA (current) | NRA | Email 1 | ☐ |
| 5 | Technical Proposal (TP) complete PDF per Section addressing TECH01, TECH02 and TECH03. TP must contain any additional supporting documents such as Annex 5 (Past Performance References), Annex 6 (Key Personnel CVs) | Bidder. See section 4 Technical Evaluation Matrix. | Email 1 | ☐ |
| 6 | Letter of Tender (Annex 7) signed & stamped | Prescribed form | Email 2 | ☐ |
| 7 | Financial Proposal / BOQ (Annex 8) signed & stamped | Prescribed form | Email 2 | ☐ |
BIDDER DECLARATION
I, the undersigned, confirm that all documents listed above are included in this submission, that all information provided is true and accurate, and that this bid complies with all requirements of RFQ No. 2025568
Company Name: ___________________________ Lot(s) Bidding For: _________________
Authorized Signatory: ____________________________ Date: __________________
Title / Position: _________________________________ Company Stamp:
ANNEX 5: PAST CLIENT REFERENCE INFORMATION FORM (Submit in Email 1)
| RFP Number: | |
| Company Name: | |
| Date: |
| INSTRUCTIONS TO BIDDERS |
| Submit a MINIMUM of THREE (3) past performance references demonstrating relevant experience. References must be from contracts completed within the last FIVE (5) years that are similar in nature, scope, or complexity to this RFP. |
| WHAT TO INCLUDE |
| EVALUATION IMPACT |
| REFERENCE #1 | |
| PROJECT INFORMATION | |
| Project Title: | |
| Client Name: | |
| Client Organization: | |
| Contract Value (USD): | |
| Contract Duration: | Start: ________________________ End: ________________________ |
| Location / Country: | |
| Your Role: | ☐ Prime Contractor ☐ Subcontractor ☐ Consortium Member |
| SCOPE OF WORK DELIVERED |
| Describe the scope of work you delivered (2–3 paragraphs). Focus on aspects similar to this RFP. |
| Insert description |
| KEY DELIVERABLES & OUTCOMES |
| # | Deliverable / Outcome |
| 1 | |
| 2 | |
| 3 | |
| 4 |
| RELEVANCE TO THIS RFP |
| Explain why this reference is relevant (1–2 paragraphs). What similarities exist between that project and this RFP? |
| Insert explanation |
| CLIENT CONTACT INFORMATION | |
| CRITICAL: Provide accurate contact information. The evaluation committee WILL contact references to verify your claims. | |
| Contact Person Name: | |
| Title / Position: | |
| Email: | |
| Phone (with country code): | |
| Organization: | |
| Best time to contact: | |
| REFERENCE LETTER | |
| Reference letter attached? | ☐ Yes – attached as: ________________ ☐ No – contact information provided for direct verification |
| REFERENCE #2 | |
| PROJECT INFORMATION | |
| Project Title: | |
| Client Name: | |
| Client Organization: | |
| Contract Value (USD): | |
| Contract Duration: | Start: ________________________ End: ________________________ |
| Location / Country: | |
| Your Role: | ☐ Prime Contractor ☐ Subcontractor ☐ Consortium Member |
| SCOPE OF WORK DELIVERED |
| Describe the scope of work you delivered (2–3 paragraphs). Focus on aspects similar to this RFP. |
| Insert description |
| KEY DELIVERABLES & OUTCOMES |
| # | Deliverable / Outcome |
| 1 | |
| 2 | |
| 3 | |
| 4 |
| RELEVANCE TO THIS RFP |
| Explain why this reference is relevant (1–2 paragraphs). What similarities exist between that project and this RFP? |
| Insert explanation |
| CLIENT CONTACT INFORMATION | |
| CRITICAL: Provide accurate contact information. The evaluation committee WILL contact references to verify your claims. | |
| Contact Person Name: | |
| Title / Position: | |
| Email: | |
| Phone (with country code): | |
| Organization: | |
| Best time to contact: | |
| REFERENCE LETTER | |
| Reference letter attached? | ☐ Yes – attached as: ________________ ☐ No – contact information provided for direct verification |
| REFERENCE #3 | |
| PROJECT INFORMATION | |
| Project Title: | |
| Client Name: | |
| Client Organization: | |
| Contract Value (USD): | |
| Contract Duration: | Start: ________________________ End: ________________________ |
| Location / Country: | |
| Your Role: | ☐ Prime Contractor ☐ Subcontractor ☐ Consortium Member |
| SCOPE OF WORK DELIVERED |
| Describe the scope of work you delivered (2–3 paragraphs). Focus on aspects similar to this RFP. |
| Insert description |
| KEY DELIVERABLES & OUTCOMES |
| # | Deliverable / Outcome |
| 1 | |
| 2 | |
| 3 | |
| 4 |
| RELEVANCE TO THIS RFP |
| Explain why this reference is relevant (1–2 paragraphs). What similarities exist between that project and this RFP? |
| Insert explanation |
| CLIENT CONTACT INFORMATION | |
| CRITICAL: Provide accurate contact information. The evaluation committee WILL contact references to verify your claims. | |
| Contact Person Name: | |
| Title / Position: | |
| Email: | |
| Phone (with country code): | |
| Organization: | |
| Best time to contact: | |
| REFERENCE LETTER | |
| Reference letter attached? | ☐ Yes – attached as: ________________ ☐ No – contact information provided for direct verification |
| REFERENCE #4 (OPTIONAL – additional strong references strengthen your score) |
| Use the same format as References #1–3 above. Additional strong references may improve your technical score. |
| SUMMARY TABLE – ALL REFERENCES | |||||
| # | Project Title | Client | Value (USD) | Year Completed | Relevance to this RFP |
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| GUIDANCE FOR CLIENT REFERENCE LETTERS (Optional) |
| If your clients are willing to provide reference letters, they should be on official letterhead and include: |
| DECLARATION |
| We certify that: • All information provided is accurate and complete • All references are from contracts we directly delivered • Client contact information is current and accurate • We authorize CRS Liberia to contact these references for verification • We understand that false or misleading information will result in disqualification |
| Authorized Signature: | |
| Full Name: | |
| Title: | |
| Company Name: | |
| Company Stamp: | |
| Date: |
| By submitting this form, we confirm that the organizations listed above are genuine past clients and have agreed to be contacted as references. We consent to CRS contacting them for the purpose of verifying our past performance. Organization: ________________________________ Signature: ________________________ Date: ____________ |
ANNEX 6 – KEY PERSONNEL CVs – (Submit in Email 1 in Technical Proposal)
| RFP Number: | |
| Company Name: | |
| Date: |
| INSTRUCTIONS TO BIDDERS |
| Submit CVs for ALL key personnel who will be assigned to this contract. Key personnel typically include: Project Manager, Technical Leads, Quality Assurance Manager, and other roles critical to delivery. |
| CV REQUIREMENTS |
| EVALUATION IMPACT |
| KEY PERSONNEL SUMMARY TABLE (complete this first, then provide individual CVs) | ||||
| Please complete this summary prior to submitting the individual CVs. Each CV must be signed and dated by the respective key personnel. Sharing of key personnel between proposals is not permitted. | ||||
| Position on Project | Full Name | Highest Qualification | Years Relevant Experience | CV Page Reference |
| Role 1 | ||||
| Role 2 | ||||
| Role 3 | ||||
| Role 4 | ||||
| Role 5 | ||||
| SUPPORTING DOCUMENTS CHECKLIST |
| Attach copies of the following documents for each key person (as applicable): |
| ☐ CV signed and dated ☐ Degree certificates ☐ Professional certifications (PMP, etc.) ☐ Professional licenses (if applicable) ☐ Training certificates ☐ Other relevant credentials |
| PERSONNEL SUBSTITUTION POLICY |
| IMPORTANT: Once the contract is awarded, the key personnel listed in this annex become contractually bound to the project. Any substitution of key personnel requires prior written approval from CRS Liberia. |
| SUBSTITUTION REQUIREMENTS: |
| COMPANY DECLARATION |
| We certify that: • All CVs are authentic and the information is accurate • All listed personnel have confirmed their availability for this project • We have secured the commitment of these individuals • We understand and accept the personnel substitution policy above • Copies of all relevant certificates and qualifications are attached |
| Authorized Signature: | |
| Full Name: | |
| Title: | |
| Company Name: | |
| Company Stamp: | |
| Date: |
ANNEX 7 – LETTER OF TENDER (Submit in Email 2)
| Contract Title: | Installation of drip irrigation kits system in Montserrado and Margibi counties. |
| To: | Catholic Relief Services (CRS) Liberia |
| RFP N°: | 2025568 |
| Date: |
We have examined the RFP and all Addenda. We offer to execute and complete the contract in conformity with the RFP requirements.
Our financial proposal totaling AMOUNT IN CURRENCY (all-inclusive) is submitted separately in Email 2.
We agree to abide by this Tender for 90 calendar days from the submission deadline.
We understand CRS is not bound to accept the lowest or any bid.
We acknowledge the financial conditions set out in Sections 18–20 (Advance Payment / Performance Bond / Retention) and commit to complying with whichever are marked applicable.
This Tender, together with the written acceptance by CRS, shall constitute a binding contract between our organizations.
| Authorized Signature: | |
| Full Name: | |
| Company: | |
| Company Stamp: | |
| Date: |
ANNEX 8 – FINANCIAL PROPOSAL / BILL OF QUANTITIES (Submit in Email 2)
| # | Item / Description | Qty | Unit | Number of Unit | Unit Price (USD) | Total Price (USD) | Notes / Assumptions | |||
| Section Title | ||||||||||
| 1 | ||||||||||
| 2 | ||||||||||
| 3 | ||||||||||
| SUBTOTAL | ||||||||||
| Section Title | ||||||||||
| 4 | ||||||||||
| 5 | ||||||||||
| SUBTOTAL | ||||||||||
| Section Title | ||||||||||
| 16 | ||||||||||
| SUBTOTAL | ||||||||||
| SUBTOTAL | ||||||||||
| Section Title | ||||||||||
| 17 | ||||||||||
| 18 | ||||||||||
| SUBTOTAL | ||||||||||
| GRAND TOTAL (all-inclusive – USD) | ||||||||||
| Advance payment requested (if applicable): | ☐ No advance payment requested ☐ Advance payment requested: ___% of contract value = USD _________ (see Annex 11 – Advance Payment Request Form) | |||||||||
| Authorized Signature: | |
| Full Name: | |
| Company Stamp: | |
| Date: |
ANNEX 9 – SUBCONTRACTOR DISCLOSURE FORM (Submit in Email 1 – if applicable)
Complete this form if you intend to subcontract any part of the work. If no subcontracting is planned, disregard the form.
| # | Subcontractor Name | Country of Registration | Scope of Subcontracted Work | Estimated % of Contract Value |
| 1 | ||||
| 2 | ||||
| 3 |
I confirm that the subcontractors listed above are eligible under the requirements of this RFP, including sanctions screening and conflict of interest requirements. I acknowledge that the prime contractor remains fully responsible for all subcontracted work.
| Authorized Signature: | ____________________ | Date: | ____________________ |
| Company Name: | ____________________ | Company Stamp: | ____________________ |
ANNEX 10 – ADVANCE PAYMENT REQUEST FORM (To submit after award in bank letterhead – if Section 18 applies)
| GUARANTEE DETAILS | |
| Guarantee Number: | Insert guarantee reference number |
| Guarantor: | Insert name and address of issuing bank, unless shown in letterhead above |
| Contract Name / Contract Number: | Insert reference number or other information identifying the contract between the Applicant and the Beneficiary |
| Beneficiary (the “Employer”): | Catholic Relief Services Liberia |
| Applicant (the Contractor): | Insert name and address of the Contractor |
| Guaranteed Amount: | Insert amount in figures and words, and the currency |
| Expiry Date: | Insert date – 70 days after the expected expiry of the Time for Completion |
| Governing Law: | Liberia |
| Party liable for guarantee charges: | The Applicant confirm or insert name of responsible party |
TO WHOM IT MAY CONCERN:
We have been informed that insert name and address of the Contractor (hereinafter called the “Applicant”) is your Contractor under Contract Number insert contract reference (the “Contract”) and wishes to receive an advance payment, for which the Contract requires the Applicant to obtain a guarantee.
At the request of the Applicant, we insert name of Guarantor / issuing bank hereby irrevocably undertake to pay you, the Beneficiary/Employer, any sum or sums not exceeding in total the amount of insert amount in figures (insert amount in words and currency) (the “Guaranteed Amount”) upon receipt by us of your demand in writing and your written statement that:
(a) the Applicant has failed to repay the advance payment in accordance with the Conditions of Contract; and
(b) the amount of the advance payment which the Applicant has failed to repay.
This guarantee shall become effective upon receipt of the first instalment of the advance payment by the Applicant.
The Guaranteed Amount shall be reduced by the amounts of the advance payment repaid to you, as evidenced by interim payment certificates issued. Following receipt of a copy of each interim payment certificate, we shall promptly notify you of the revised Guaranteed Amount accordingly.
Any demand for payment must contain your signature(s), which must be authenticated by your bankers or by a notary public. The authenticated demand and statement must be received by us at the following address:
| Insert full address of the guarantor’s office at which authenticated demands must be received |
on or before the Expiry Date of insert date – 70 days after the expected expiry of the Time for Completion, which date is automatically extended to include any extensions of the Time for Completion and the complete resolution of all claims under the Contract. This guarantee shall expire on the Expiry Date.
The party liable for the payment of any charges in connection with this guarantee is the Applicant: insert name of Applicant / Contractor.
This guarantee shall be governed by the laws of insert governing law, and shall be subject to the Uniform Rules for Demand Guarantees (URDG) 2010 Revision, ICC Publication No. 758.
| Note: This guarantee is issued at the request of the Applicant. It does not constitute a commitment by the Guarantor beyond the terms stated above. Once the Expiry Date has passed without a valid demand having been received, this guarantee becomes null and void whether or not it is returned to us. |
| EXECUTED BY THE GUARANTOR |
| Signed by (1): | Signed by (2): |
| _______________________________________ | _______________________________________ |
| Full Name: | Full Name: |
| Title / Position: | Title / Position: |
| Date: | Date: |
| Bank Stamp / Seal: |
|
ANNEX 11 – PERFORMANCE BOND TEMPLATE (To submit after award in bank letterhead – if Section 19 applies)
| GUARANTEE DETAILS | |
| Guarantee Number: | Insert guarantee reference number |
| Guarantor: | Insert name and address of issuing bank, unless shown in letterhead above |
| Contract Name / Contract Number: | Insert reference number or other information identifying the contract between the Applicant and the Beneficiary |
| Beneficiary (the “Employer”): | Catholic Relief Services (CRS) Liberia 16th Street Gardiner Avenue Seaside, C-140 Building, Sinkor, Monrovia, Liberia |
| Applicant (the Contractor): | Insert name and address of the Contractor |
| Guaranteed Amount: | 20% of the Contract Price Insert amount in figures, amount in words, and currency |
| Payment Account (Beneficiary): | Insert account name and details to which payment should be made – e.g. CRS Sierra Leone bank account details |
| Expiry Date: | Insert date – 70 days after the expected expiry of the Defects Notification Period |
| Extension Right: | One-time extension of up to one (1) year upon Beneficiary’s written request before expiry |
| Governing Law: | Liberia |
| Party liable for guarantee charges: | The Applicant confirm or insert name of responsible party |
TO WHOM IT MAY CONCERN:
We have been informed that insert name and address of the Contractor (hereinafter called the “Applicant”) is your Contractor under Contract Number insert contract reference (the “Contract”), which requires the Applicant to obtain a Performance Security.
At the request of the Applicant, we insert name of Guarantor / issuing bank hereby irrevocably undertake to pay you, the Beneficiary/Employer, any sum or sums not exceeding in total the amount of 20% of the Contract Price – being insert amount in figures (insert amount in words and currency) (the “Guaranteed Amount”) – upon receipt by us of your demand in writing and your written statement indicating in what respect the Applicant is in breach of its obligations under the Contract, without the Beneficiary needing to prove or to show grounds for the demand or the sum specified therein.
In the event of any claim under this Guarantee, payment shall be effected to the following account:
| Insert the account name and details on which payments are to be made for the account of Catholic Relief Services (CRS) Sierra Leone insert full account details – bank name, account number, SWIFT/BIC, branch |
Any demand for payment must contain your signature(s), which must be authenticated by your bankers or by a notary public. The authenticated demand and statement must be received by us at the following address:
| Insert full address of the guarantor’s office at which authenticated demands must be received |
on or before the Expiry Date of insert date – 70 days after the expected expiry of the Defects Notification Period, which date is hereby automatically extended to include any extensions of the Defects Notification Period and until the complete resolution of all claims under the Contract. This guarantee shall expire on the Expiry Date.
The Guarantor agrees to a one-time extension of this Guarantee for a period not to exceed one (1) year, in response to the Beneficiary’s written request for such extension. Such request must be presented to the Guarantor before the expiry of the Guarantee.
The party liable for the payment of any charges in connection with this Guarantee is the Applicant: insert name of Applicant / Contractor.
This guarantee shall be governed by the laws of insert governing law, and shall be subject to the Uniform Rules for Demand Guarantees (URDG) 2010 Revision, ICC Publication No. 758.
| Note on signatories: Whether one or more signatories for the bank are required will depend on the bank and/or applicable law. Both signature blocks are provided below. Complete as required. |
| EXECUTED BY THE GUARANTOR |
| Signed by (1): | Signed by (2): |
| _______________________________________ | _______________________________________ |
| Full Name: | Full Name: |
| Title / Position: | Title / Position: |
| Date: | Date: |
| Bank Stamp / Seal: |
|
ANNEX 12: CODE OF CONDUCT FOR SUPPLIERS & SERVICE PROVIDERS
Catholic Relief Services (CRS) is committed to the principles of responsible sourcing. We expect our suppliers and service providers to fully comply with applicable contractual obligations – including CRS’s terms and conditions, local and applicable laws – and to adhere to internationally recognized environmental, social, and corporate governance standards. We also expect our suppliers to apply these standards to their own suppliers and subcontractors.
This Code of Conduct is inspired by:
▸ The United Nations Guiding Principles on Business and Human Rights
▸ The ILO Declaration on Fundamental Principles and Rights at Work
▸ Applicable CRS policies, procedures and standards
| 1. SOCIAL |
Suppliers and service providers must prohibit all forms of harassment, sexual harassment, exploitation and abuse – including sexual exploitation and abuse and trafficking in persons. Any sexual activity with a child (defined as any person under 18) is considered sexual abuse regardless of the local age of consent.
▸ Have mechanisms in place to prevent, address, and actively respond to harassment, sexual harassment, exploitation and abuse, including sexual exploitation and abuse, and human trafficking.
▸ Support the protection of internationally proclaimed human rights and prohibit forced, compulsory, and involuntary labour and child labour.
▸ Do not recruit or employ children under the age of 15. Do not recruit or employ children under 18 for work that is mentally or physically dangerous or that interferes with schooling.
▸ Treat employees with dignity and respect and provide a safe, hygienic workplace that complies with national laws and is free from discrimination based on race, gender, age, religion, sexuality, culture, or disability.
▸ Provide accessible and confidential reporting mechanisms for employees and other stakeholders to report concerns or suspicions of any form of harassment, abuse, exploitation, or potentially illegal practices by management or employees.
▸ Commit to protecting journalists and whistleblowers from reprisals.
▸ Respect freedom of association and the right to collective bargaining as defined in applicable laws.
▸ Ensure that wages and hours of work are in line with national legal standards.
¹ Refer to pages 6–7 of CRS’s Safeguard Policy for more details on prohibited exploitative practices, including the provision of commercial sexual services, employment practices, and relationships with beneficiaries that are abusive.
| 2. GOVERNANCE |
▸ Comply with all applicable domestic and international trade laws and regulations, including but not limited to antitrust laws, trade controls, and sanctions regimes.
▸ Conduct business with integrity as the foundation of all business relationships.
▸ Ban all types of bribery, corruption, money laundering, and terrorist financing.
▸ Prohibit gifts to public or private officials that aim to influence business decisions or encourage them to act contrary to their obligations.
▸ Respect the privacy and confidential information of all employees and business partners. Protect data and intellectual property from misuse.
▸ Establish data protection and management standards that address data collection, backup, sanitation, and disposal. The Data Owner must be aware of the terms and conditions for provision of data and give consent in accordance with CRS’s Responsible Data Values and Principles.
▸ Implement an appropriate compliance management policy and procedure that facilitates compliance with applicable laws, regulations, and standards.
| 3. ENVIRONMENT |
▸ Promote the safe and environmentally responsible development, manufacture, transportation, use, and disposal of products.
▸ Comply with all applicable environmental, health, and safety regulations.
▸ Ensure, using appropriate management policies and procedures, that the quality and safety of products meet applicable requirements.
▸ Protect the lives and health of employees and neighbours, as well as the general public, from hazards inherent in your processes and products.
▸ Use resources efficiently, apply energy-efficient and environmentally friendly technologies, and reduce waste as well as emissions to air, water, and soil.
| Donor Compliance Note: CRS is a recipient of grants and contracts provided by governmental, public, and private donors. All suppliers and service providers are hereby informed that additional donor-specific compliance measures may be included in the legal instrument by which goods or services are purchased. |
| CRS reserves the right to conduct audits or due diligence assessments to verify your compliance and will take reasonable steps to investigate and address any concerns. CRS reserves the right to terminate any relationship for non-compliance with the requirements described in this document. |
| HOW TO REPORT CONCERNS | |
| Channel | Contact / Details |
| CRS Management | Contact your CRS programme or procurement focal point |
| CRS Hotline (online) | http://bit.ly/crshotline |
| alert@crs.org | |
| Phone / Skype | 1-866-295-2632 |
| Postal (mark ‘Confidential’) | General Counsel Catholic Relief Services 228 W. Lexington Street Baltimore, MD 21201 USA |
Ensuring the principles of sustainability in our supply chain is important to CRS. We hope that as a partner you demonstrate your commitment by complying with your own code of conduct or the corporate policies that encompass these standards.
| For RFQ / RFP submissions: By submitting a quotation or proposal in response to a CRS solicitation, your organization acknowledges having read and understood this Code of Conduct and commits to complying with its requirements. A formally signed copy will be required from the selected vendor prior to contract or purchase order issuance. |
| FORMAL CERTIFICATION – SELECTED VENDOR (to be signed prior to contract / PO issuance) | |||||||||||||
I, the undersigned, certify that I am the duly authorized legal representative of the company named below, that I have read and fully understood the CRS Code of Conduct for Suppliers & Service Providers, and that I commit to enforcing compliance with this Code of Conduct throughout our organization and with any agents, subcontractors, or suppliers engaged in connection with CRS activities.
| |||||||||||||
| CRS Use: This signed form must be filed with the contract / PO documentation before issuance. File reference: ________________ Received by: ________________ Date: ________________ |
ANNEX 13 – EQUIPMENT COMPLIANCE SELF-DECLARATION (NDAA SECTION 889) (Submit in Email 1)
Criterion E6 – Equipment Compliance. To be completed on company letterhead, signed and stamped by an authorized signatory.
| Equipment from the prohibited manufacturers listed below (Huawei, ZTE, Hytera, Hikvision, Dahua, or any subsidiary or affiliate) must not be included in the proposed solution. A false declaration will result in disqualification. |
| BIDDER INFORMATION | |
| RFP N°: | ____________________________ |
| Company Name: | ____________________________ |
| Company Address: | ____________________________ |
| Authorized Representative: | ____________________________ |
| Title / Position: | ____________________________ |
List the manufacturer, model, and country of origin for each equipment category in the proposed solution. Attach a factsheet or brochure confirming these details.
| Equipment Category | Manufacturer & Model | Country of Origin |
| Door reader units (all five entry points) | ||
| Access cards / credentials | ||
| Enrollment and administration station (hardware) | ||
| Controllers, power supplies, locks / electric strikes, exit buttons | ||
| Network equipment, cabling, and any other electronic components |
I, the undersigned, on behalf of the company named above, declare that:
| AUTHORIZED SIGNATORY | |
| Name of Signatory: | ____________________________ |
| Position: | ____________________________ |
| Signature: | ____________________________ |
| Date: | ____________________________ |
| Company Stamp: | ____________________________ |
CONTRACT TEMPLATE
Service Contract
LR.{{FY}}.SVR.{{SupplierNumber}}.01.00
This Service Contract (the “Agreement”) is entered on the {{StartDay}}nd day of {{StartMonth}} {{StartYear}} between:
Catholic Relief Services – United States Conference of Catholic Bishops 228 West Lexington Street, Baltimore, MD, 21201-3413, USA, represented by {{CRSSignatory}}, the {{SignatoryRole}} of 16th Street, Gardner Avenue, Seaside C-140 Building Sinkor Monrovia, Liberia.
And
{{EntityName}} represented by {{EntityRep}}, the {{RepTitle}}, (hereinafter referred to as “Service Provider“), of Montserrado County or collectively hereinafter may be referred to as PARTIES.
CRS hereby engages Consultant to perform Consultancy Services, as set forth in the attached Scope of Work Exhibit A (the “Services”), on the terms and conditions described in this Agreement. Consultant hereby accepts the engagement as a Consultant to CRS and agrees to provide the Consulting Services set forth in the Scope of Work on the terms and conditions described in this Agreement.
Consultant shall provide services under this Agreement as an independent Consultant, and not as an employee or agent of CRS or any subsidiary or affiliate of CRS (collectively, a “CRS Entity”). Nothing in this Agreement shall at any time be construed so as to create the relationship of employer and employee, partnership, principal and agent, or joint venture between Consultant and any CRS Entity.
1.1 The term of this Agreement (the “Contracting Period”) shall be determined by the Start and End dates indicated in this Agreement by reference. The Agreement may be terminated before the end of the Contracting Period only in the circumstances described in Article IV.
1.2 The contract duration shall be commencing from {{StartDate}}, to {{End Date}}.
Consultant shall devote such time and attention to Consultant’s duties under this Agreement as may be necessary to discharge the duties properly, and Consultant shall exert Consultant’s best efforts in the performance of the duties. Consultant shall not be subject to a fixed work schedule, but shall be available, consistent with Consultant’s personal needs and other commitments, to provide the services set forth in the Appendix 1 -Scope of Work- during the Contracting Period.
Consultant’s services under this Agreement shall not cause Consultant to be directly involved in the business operations of CRS. Consultant shall have no responsibility for the day-to-day management of any CRS Entity, nor shall Consultant supervise, or be supervised by, personnel of any CRS Entity. Consultant shall have no authority to execute any document or enter into any contract on behalf of a CRS Entity, or to bind a CRS Entity in any relationship with a third party.
CRS acknowledges and agrees that during the Contracting Period, Consultant is free to engage in other business activities or to provide Consulting Services to other parties without the approval or consent of any CRS Entity.
All reports and data prepared by consultant in connection with the services performed under this Agreement shall be the property of CRS and shall not be used by consultant in connection with any other activity.
1.1 As compensation for services under this Agreement, CRS shall pay a Lump sum of ${{TotalAmount}} ({{InLetter}} ) (including taxes) as professional/consultancy fees. Payment will be made in tranches based on deliverables as outlined in Exhibit B: Payment Schedule.
1.2 For Construction contracts, CRS shall retain 10% of the total amount as a security deposit, which will be released upon successful completion of the warranty period for the construction work, subject to confirmation that all contractual obligations have been met.
1.3 Each instalment will be expensed only upon confirmation that the associated deliverable has been met and formally accepted by CRS.
Payments will be made to the service provider within 15 days of formal acceptance of the deliverable tied to each instalment. Payments shall be made to the following bank account:
The Consultant shall receive no other compensation for providing services under this Agreement.
If the Agreement is terminated before the contracting period as described in Article IV, the Consultant’s fee shall be multiplied by a fraction, the numerator of which is the number of days from the beginning of the contracting period until the early termination date, and the denominator of which is the number of days in the full 45 days contracting period.
The full payment will only be made after the delivery has been inspected and accepted by CRS. Any discrepancies in the quality or quantity of the delivered goods or services will need to be rectified by the service provider at their own cost before the full payment is made.
1.4 All reimbursable expenses, including accommodation, communication cards, and per diem, are detailed in Exhibit C: Reimbursable Expenses, and shall be reimbursed in accordance with the conditions outlined.
Consultant shall provide basic office equipment (including computer, fax/scan machine, and/or copier, specialized software) and workspace at Consultant’s expense as necessary to provide services under this Agreement. Consultant shall provide all other equipment required to deliver the services as stipulated in Appendix 1.
During the Contracting Period, Consultant shall not be eligible to participate in, or to earn any benefit under, any employee benefit plan, fringe benefit program, bonus or incentive program, or other compensation arrangement of a CRS Entity (including, but not limited to, any comprehensive medical insurance, workers’ compensation, disability insurance, accidental death or dismemberment insurance, life insurance, or any defined benefit plan or defined contribution plan sponsored by any CRS Entity). The preceding sentence shall apply throughout the Contracting Period even if Consultant is later reclassified as a common law employee for part or all of the Contracting Period. Consultant shall have no right to, and agrees not to, make any claim against CRS under any workers’ compensation or unemployment compensation statute. Nothing in this agreement, nor any payments made to Consultant under this Agreement, shall be construed to reduce any severance payment or other benefit to which Consultant is or may become entitled as a result of Consultant’s employment by a CRS Entity before or after the Contracting Period. To the extent that Consultant is entitled to receive benefits under any compensation arrangement of a CRS Entity upon Consultant’s termination of service, Consultant acknowledges that the terms of the compensation arrangement and applicable law will determine whether the distribution of the benefit will be postponed while the Consultant provides services under this Agreement.
In the event of a delay exceeding 48 hours from the agreed delivery time and deliverable outlined in Exhibit A: Payment Schedule, except in cases of Force Majeure, the Service Provider agrees that CRS shall deduct liquidated damages from the Service Provider’s payment. The liquidated damages will be calculated as 1% of the total value of the goods or services for each week of delay (7 working days). Liquidated damages will be prorated and accumulated daily until the delivery is made or the contract is terminated.
If the delay exceeds seven (7) working days, CRS is entitled to terminate this contract without further notice.
Consultant acknowledges that CRS has contracted for Consultant’s services in recognition of Consultant’s knowledge and prior experience. The Consultant agrees that this Agreement is personal in nature and Consultant shall not subcontract or assign any duties under this Agreement without CRS’s prior written consent
Consultant acknowledges that during the Contracting Period, Consultant has been or will be entrusted with certain business, financial, technical, personnel, or other proprietary information and materials that are the property of CRS (“Confidential Information”). Consultant agrees that during and after the Contracting Period, Consultant will not directly or indirectly communicate, disclose, or use (except for the purposes of performing services under this Agreement) any Confidential Information. All Confidential Information in Consultant’s possession and Consultant will not keep or retain copies of such Confidential Information in any form whatsoever.
Consultant agrees that all work performed by Consultant during the Contracting Period for any CRS Entity is a “work for hire” as defined under United States copyright law, and that all such work and any intellectual property rights contained therein, including (but not limited to) data, creative works, trademarks, patents, proprietary processes, and copyrights, is the property of CRS. All inventions and devices designed, created, developed, and/or built by the Consultant, either alone or with others, in connection with providing the Services listed in the Scope of Work, shall be the property of CRS and Consultant shall execute such documents and assignments as may be necessary to vest the copyrights or patent rights therein in CRS.
Consultant represents and warrants to CRS as follows: (a) Consultant has the expertise, experience and knowledge to perform and deliver the Services; (b) Consultant will use reasonable commercial efforts to perform and deliver the Services in a diligent and timely manner; (c) Consultant is not a party to any agreement which prohibits, and is not otherwise prohibited from, performing and delivering the Services; (d) any work product prepared by Consultant as a consequence of the Services will not misappropriate or infringe the intellectual property rights of third parties; (e) Consultant will perform and deliver the Services in accordance with the Scope of Work; and (f) Consultant will perform and deliver the Services in accordance with all applicable laws, ordinances, requirements, directions, rules, statutes, regulations or lawful orders of any governmental authority or agency.
Consultant acknowledges and agrees that Consultant shall be solely responsible for the full amount of any state, employment, or self-employment tax associated with any payments Consultant earns or receives under this Agreement, and for any interest, penalty, or other addition that arises in connection with such tax. CRS shall be responsible for deducting the statutory withholding tax 10% and depositing or paying the amount of tax due to the appropriate government agency in connection with any payments Consultant earns or receives under this Agreement. CRS shall furnish Consultant with a receipt in respect of the withholding tax paid. CRS acknowledges and agrees that CRS shall not treat Consultant as an employee for state or employment tax purposes with respect to the Consulting Services rendered under this Agreement unless CRS is directed in writing to do so by the relevant taxing authority.
Consultant shall comply with all applicable laws and regulations in connection with Consultant’s performance of this Agreement. Consultant shall indemnify and defend CRS from any and all suits, claims, or losses that CRS might suffer, pay, or incur as a result of Consultant’s failure to comply with applicable laws or regulations.
Consultant acknowledges, understands, and agrees to comply with CRS Code of Conduct attached hereto as Appendix 3. In addition, Consultant acknowledges that failure to comply with the Code of Conduct shall constitute a material breach of this Agreement for the purposes of Article IV hereof.
Consultant may terminate this Agreement only in the event that CRS materially breaches any provision of this agreement and fails to cure the breach within Five (5) days after receiving notice of the breach. Consultant must notify CRS in writing of Consultant’s intent to terminate the Agreement under this Article IV, Section 1, and the notice must describe any breach that is a cause of the termination. Consultant must give CRS five (5) days to cure any breach of which CRS has been notified pursuant to this Article IV, Section 1. Such Five (5) days period shall begin when CRS receives written notification from consultant. If CRS fails to cure such breach within the Five (5) days period, this Agreement shall be terminated effective as of the date on which CRS received the termination notice.
Termination by CRS. CRS may terminate this Agreement in whole or in part without penalty: (a) if the Consultant fails to comply with or breaches any of the material terms or conditions of this Agreement; (b) if the Consultant is unable or fails to carry out its obligations under this Agreement in a satisfactory or timely manner; or (c) at its convenience and without fault of the Consultant upon seven (7) calendar days’ written notice.
Neither Party shall be liable for its failure to perform under this Agreement (a) to the extent the non-performance is caused by events or conditions beyond that Party’s control, and (b) provided that Party gives prompt notice to the other Party and makes all reasonable efforts to perform.
Consultant shall and does hereby indemnify, defend and hold harmless CRS, its affiliated entities, successors and assignees and their respective officers, directors, managers and employees from and against any and all claims for damages for personal injury or property damage, or any other claims, demands, losses, costs, expenses, obligations, liabilities, damages, recoveries, and deficiencies, including interest, penalties, and reasonable attorney fees and costs, that CRS may incur or suffer and that result from Consultant’s performance of Services, or are related to any breach or failure of Consultant to perform any of the representation, warranties and agreements contained in this Agreement.
All invoices, payments, and other general correspondence required or permitted under this Agreement shall be in writing and shall be deemed validly given when delivered by a method reasonably calculated to effect delivery under the circumstances, whether that be by hand, by recognized professional courier service, by recognized overnight express delivery service, or by First Class mail, certified, return receipt requested, addressed as follows:
CRS
Address: 16th Street, Gardner Avenue, Seaside C-140 Building Sinkor Monrovia, Liberia.
Telephone No: 0770211051
Email: liberiarfq@crs.org
Service provider
Name: {{EntityRep}}
Title: {{RepTitle}},
Address: Monrovia Liberia
Telephone No:
Email:
With copies to (which shall not be considered notice under this Agreement):
Name: Florence Williams-Harb
Title: Operations Manager
Agency: Catholic Relief Services
Tel: 0775 833 011
Email: Florence.williams@crs.org
Either party may change the address to which notices are to be sent by giving written notice of such change of address to the other. Any termination notice must be delivered by a method which provides a certification of delivery (e.g. certified mail).
This Agreement embodies the entire understanding between the parties with respect to the subject matter of the Agreement. No change, alteration, or modification of this Agreement may be made except in writing signed by both Consultant and CRS.
If any provision of this Agreement is held by a court of competent jurisdiction to be invalid, void or unenforceable, the remaining provisions shall continue in full force and effect.
The expiration or termination of this Agreement for any reason shall not terminate the obligations or liabilities of the parties under Article 1 & 7, Article II & 6, Article II & 2, Article III & 3, Article III & 6, Article VI, and the applicable portions under this Article IX & 2, each of which shall survive any such expiration or termination.
Consultant doesn’t provide material support or resources to any individual or organization that is known to have advocated, sponsored, or to have been engaged in unlawful violent activities or terrorist activity.
Professional acknowledges, understands, and agrees to comply with the CRS Code of Conduct attached hereto as Exhibit B. In addition, Services provider acknowledges that failure to comply with the Code of Conduct shall constitute a material breach of this Agreement for the purposes of Article IV hereof.
This Agreement shall be governed by the laws of Liberia.
IN WITNESS WHEREOF, the parties to this Agreement have duly executed and delivered this agreement as of the day and year first above written.
This Contract is prepared in two copies. One original copy of the Contract will be held by CRS and one copy by the Service provider.
We understand and accept the terms and conditions of the above Contract.
| For and on behalf of the CRS
Name: {{CRSSignatory}} Title: {{SignatoryRole}}
Signature:
Date:
Witnesses: Signature: _________________________
Name: | For and on behalf of Service provider:
Name: {{EntityRep}} Title: {{RepTitle}}
Signature:
Date:
Witnesses: Signature: _________________________
Name:
|
Exhibit A: Scope of Work
Exhibit B: Payment Schedule
| Deliverables reference | Deliverables | Payment percentage | Amount ($) | Expected Delivery Date | Conditions for release |
| D01 | Contract signing | [Insert %] | [Insert amount] | [Insert Date] | Contract signed and received by CRS. |
| D02 | First draft report submitted | [Insert %] | [Insert amount] | [Insert Date] | Draft report reviewed and accepted by CRS. |
| D03 | Final delivery of services | [Insert %] | [Insert amount] | [Insert Date] | Final deliverable submitted and accepted. |
| D04 | Successful warranty period completion for Construction only | 10% | [Insert amount] | [Insert Date] | Confirmation of warranty obligations met. |
| Total | [Insert amount] |
Exhibit C: Reimbursable Expenses
| Expense Type | Description | Amount ($) | Conditions for Reimbursement |
| Accommodation | Costs for lodging during the project period | [Insert amount] | Submission of valid receipts and approval by CRS |
| Communication Card | Expenses for communication needs | [Insert amount] | Submission of valid receipts |
| Per diem | Daily allowances for meals and incidentals | [Insert amount] | Based on agreed rates and approved travel plan |
| Total | [Insert amount] |
Exhibit D: Supplier / Service Provider Code Of Conduct
Catholic Relief Services (CRS) has committed to the principles of responsible sourcing and we expect our suppliers and service providers to fully follow the applicable contractual obligations to include CRS terms & conditions, local and relevant/otherwise applicable laws and to adhere to internationally recognized environmental, social, and corporate governance standards. We also expect our suppliers to implement these standards with their suppliers and sub Service providers, as inspired by the United Nations Global Compact initiative, the United Nations Guiding Principles and Human Rights, the International Labour Organization’s Declaration on Fundamental Principles and Rights at Work, ETI Base Code, and applicable
CRS’ Policies, Procedures and Standards.
with applicable laws, regulations, and standards.
Because CRS is a recipient of numerous grants or contracts provided by governmental, public, and private donors, all suppliers and service providers are hereby notified that other donor-specific compliance measures may be included in the legal instrument through which goods or services are procured.
CRS reserves the right to conduct due diligence audits or assessments to ensure your compliance and will take reasonable steps to investigate or otherwise take appropriate action to address concerns. CRS reserves the right to terminate any relationship for non-adherence to the abovementioned requirements.
Should you have any concerns or suspicions of any forms of harassment, abuse and exploitation described above and in CRS’ Safeguarding Policy, illegal or improper conduct, CRS requires you to report through any of the following channels:
Attention: General Counsel Catholic Relief Services 228 W. Lexington Street Baltimore, MD 21201
Ensuring the principles of sustainable development in our supply chain is important to CRS. We hope that as our partner you show your commitment via compliance with your own code of conduct or company policies that embrace these standards.
In accepting business from CRS in the form of a purchase order, contract, or agreement, you are implicitly accepting your organization’s roles and responsibilities outlined in this document.